KRVE 22 PP
Cam follower (stud-type track roller) with eccentric collar, integral sealing and relubrication featureCam followers (stud-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. They are based on a needle roller bearing with a threaded solid stud instead of an inner ring. The design includes an eccentric collar pressed onto the stud, and a thick-walled outer ring with a crowned running surface. The bearings are supplied sealed and ready-to-mount, and can be relubricated via the stud.
- High radial load carrying capacity
- Accommodate axial loads due to skew or tilting
- Long service life
- Easy to mount
- Sealed for increased reliability, with relubrication feature
Description
Dimensions
| Outside diameter | D | 22 mm |
|---|---|---|
| Attachment diameter | d | 13 mm |
| Total length | B | 36.2 mm |
| Width outer ring | C | 12 mm |
| Length shank on stud | B1 | 23 mm |
| Width locking collar | B3 | 10 mm |
| Distance face outer ring to face side washer | C1 | 0.6 mm |
| Outside diameter flange ring | d1 | 17.1 mm |
| Thread stud | G | M10x1 |
| Length thread | G1 | 12 mm |
| Seat diameter for lubrication accessories | M | 3 mm |
| Width across flats | SW | 5 mm |
| Eccentricity | c | 0.5 mm |
Calculation data
| Basic dynamic load rating | C | 5.61 kN |
|---|---|---|
| Basic static load rating | C0 | 9.5 kN |
| Fatigue load limit | Pu | 1.06 kN |
| Maximum dynamic radial loads | Fr | max. 5.5 kN |
| Maximum static radial loads | F0r | max. 7.8 kN |
| Limiting speed | 3 600 r/min |
Mass
| Mass cam follower | 0.048 kg |
Mounting information
| Recommended tightening torque | 15 N·m |
Included products
| Grease fitting | NIP B1.3×4.5 |
| Hexagonal nut | M 10×1 |
Tolerances and clearances
Bearing data
Bearing interfaces
