KMTA 10
Precision lock nut with locking pinsKMTA precision lock nuts have a cylindrical outside surface and are intended for applications where high precision, simple assembly and reliable locking are required. The three equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components. Maximum axial run-out between the locating face and thread (up to size 40): 0.005 mm.
- No keyway required
- Withstands high axial loads
- Reliable, effective locking mechanism
- Designed for frequent and simple installation and removal
- Available for thread M 25×1.5 to M 200×3 (sizes 5 to 40)
Description
Dimensions
| G | M 50×1.5 | Thread |
|---|---|---|
| d1 | 63 mm | Outside diameter locating side face |
| B | 24 mm | Width |
| d3 | 70 mm | Outside diameter |
| d4 | 52 mm | Inner diameter locating side face |
| J1 | 61.5 mm | Pitch diameter for pin-type face spanner |
| J2 | 13 mm | Distance between holes for pin-wrench and locating side face |
| N1 | 4.3 mm | Diameter holes for pin-type face spanner |
| N2 | 6 mm | Diameter holes for pin-wrench |
Calculation data
| Axial static load carrying capacity | 300 kN |
Mass
| Mass | 0.32 kg |
Mounting information
| Associated spanner (Hook spanner in accordance with DIN 1810) | B 68-75 |
| Set / Locking screw size | M6 |
| Recommended tightening torque | 8 N·m |
