KDN.K06020CP0
Reali-Slim thin section radial contact ball bearingRadial contact ball bearings with seals or shields are designed to accommodate radial loads and some axial loads in either direction. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are available with metric and inch boundary dimensions. Depending on the design and series the bearings can be provided with chemical and corrosion resistance.
- Accommodate radial and some axial loads in both directions
- Thin cross section
- Lightweight
- Low friction
- High stiffness
- High running accuracy
Description
Dimensions
| d | 60 mm | Bore diameter |
|---|---|---|
| D | 100 mm | Outside diameter |
| H | 20 mm | Radial cross section |
| B | 20 mm | Width |
| d1 | ≈ 75 mm | Shoulder diameter inner ring |
| D1 | ≈ 85 mm | Shoulder diameter outer ring |
9.525 mm | Ball diameter | |
1.5 mm | Maximum radius of shaft or housing fillet |
Calculation data
| Dynamic load rating, Kaydon, radial direction | CK | 14.2 kN |
|---|---|---|
| Basic static load rating, radial direction | C0 | 17.1 kN |
Mass
| Mass bearing | ≈ 0.58 kg |
