BC2B 322564
Backing bearingBacking bearings have been specially developed for cold rolling mills of the cluster type, but can also be used for other applications, such as straightening or bending machines. These bearings have a particularly thick-walled outer ring and can be mounted on stationary support shafts to form backup or straightening rolls.
- Super-precision quality for tolerances of run-out
- Very tight tolerances for the cross-sectional height
- Designed for high loads
Description
Dimensions
| D | 260 mm | Outside diameter |
|---|---|---|
| d | 110 mm | Bore diameter |
| H | max. 74.98 mm | Section height |
| B | 98 mm | Total bearing width over inner ring(s) |
| C | 98 mm | Total bearing width over outer ring(s) |
| F | 134 mm | Raceway diameter inner ring |
| E | 190 mm | Raceway diameter outer ring |
| r | min. 1 mm | Chamfer dimension outer ring |
| K | 6 mm | Diameter lubrication hole |
|---|---|---|
6 | Number of holes |
Calculation data
| Basic dynamic load rating | C | 616 kN |
|---|---|---|
| Basic static load rating | C0 | 800 kN |
| Fatigue load limit | Pu | 91.5 kN |
| Maximum dynamic radial loads | Fr | max. 335 kN |
| Maximum static radial loads | F0r | max. 475 kN |
Mass
| Mass bearing | 35.6 kg |
