AOH 241/1000
Withdrawal sleeve, for oil injection, ISO standardsWithdrawal sleeves are slit tapered sleeves that are used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. This AOH(X) sleeve has dimensions in accordance with ISO standards and are designed for oil injection mounting and dismounting. The sleeve is located on the shaft by a lock nut or an end plate. The lock nuts and appropriate locking device can be ordered separately. End plates are not manufactured by SKF.
- Cost effective
- Good mounting and dismounting control
- Less manual effort
- Greater operator safety
Description
Dimensions
| d1 | 950 mm | Bore diameter |
|---|---|---|
| d | 1 000 mm | Outside diameter small taper |
| B1 | 645 mm | Width |
| B2 | 695 mm | Width sleeve and bearing before sleeve is driven into bore |
| G | Tr 1060×8 | Thread |
| G1 | 65 mm | Length thread |
| G2 | G 1/4 | Thread oil supply duct |
| G3 | 15 mm | Length of connecting thread for oil supply |
| A | 15 mm | Distance bore – oil supply duct |
1:30 | External taper |
Mass
| Mass withdrawal sleeve | 511 kg |
Associated products
| Hydraulic nut | HMV 212E |
| Nut for removal | HM 31/1060 |
