7602030-2RS-TVP
Axial angular contact ball bearing
Axial angular contact ball bearings 7602..-2RS, single direction, with contact angle α = 60°, restricted tolerances, lip seals on both sides
Replaces
7602030.2RS.TVP
Description
Metric
Imperial
Main Dimensions & Performance Data
| d | 30 mm | Bore diameter |
| 0 mm | Bore diameter upper tolerance | |
| -0.005 mm | Bore diameter lower tolerance | |
| D | 62 mm | Outside diameter |
| 0 mm | Outside diameter upper tolerance | |
| -0.007 mm | Outside diameter lower tolerance | |
| B | 16 mm | Width |
| 0 mm | Width upper tolerance | |
| -0.12 mm | Width lower tolerance | |
| Ca | 27,500 N | Basic dynamic load rating, axial |
| C0a | 66,000 N | Basic static load rating, axial |
| Cua | 3,000 N | Fatigue load limit, axial |
| nG Grease | 5,000 1/min | Limiting speed for grease lubrication |
| nϑ | 3,800 1/min | Thermally safe operating speed |
| ≈m | 235 g | Weight |
Mounting dimensions
| Da | 52.5 mm | Diameter of housing |
| Da | H12 | Diameter of housing clearance |
| da | 39.5 mm | Diameter shaft |
| da | h12 | Diameter shaft clearance |
Dimensions
| rmin | 1 mm | Minimum chamfer dimension |
| r1 min | 1 mm | Minimum chamfer dimension |
| a | 48 mm | Distance between the apexes of the pressure cones |
| α | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| MR | 0.09 Nm | Bearing frictional torque |
| caL | 893 N/µm | Rigidity axial |
| 2 µm | Axial runout | |
| ZM30 | Recommended INA precision locknut for radial locking | |
| AM30 | Recommended INA precision locknut for axial locking | |
| MA | 32 Nm | Tightening torque for the recommended INA precision locknut |
| 10,240 N | Required locknut force axial |
Your current product variant
| Cage | TVP | Plastic cage |
| Sealing | 2RS | Contact lip seals on both sides |
| Arrangement bearing set | Standard | Single bearing |
| Lubricant | Without | not greased |
Characteristics
