6004/HC5C3
Hybrid deep groove ball bearingHybrid single row deep groove ball bearings have rings made of bearing steel and rolling elements made of bearing grade silicon nitride (Si3N4), which make the bearings electrically insulating. Deep groove ball bearings are the most widely used bearing type, especially in electric motors. The silicon nitride elements not only provide protection from electric current damage but also, when compared to same-sized bearings with steel rolling elements, provide enhanced bearing performance, extended bearing service life, higher speed capability, high wear-resistance, high bearing stiffness, reduced risk of smearing and false (brinelling, and less sensitivity to temperature gradients. These characteristics make them suitable for use in difficult conditions and contaminated environments.
- Protected against electric current damage
- Especially suited for use in difficult conditions and contaminated environments
- Typical benefits of single row deep groove ball bearings
Description
Dimensions
d | 20 mm | Bore diameter |
---|---|---|
D | 42 mm | Outside diameter |
B | 12 mm | Width |
d1 | ≈ 27.2 mm | Shoulder diameter inner ring |
D1 | ≈ 34.8 mm | Shoulder diameter outer ring |
r1,2 | min. 0.6 mm | Chamfer dimension |
Abutment dimensions
da | min. 23.2 mm | Abutment diameter shaft |
---|---|---|
Da | max. 38.8 mm | Abutment diameter housing |
ra | max. 0.3 mm | Fillet radius |
Calculation data
Basic dynamic load rating | C | 9.36 kN |
---|---|---|
Basic static load rating | C0 | 5 kN |
Fatigue load limit | Pu | 0.156 kN |
Reference speed | 43 000 r/min | |
Limiting speed | 26 000 r/min | |
Calculation factor | kr | 0.025 |
Calculation factor | f0 | 13.8 |
Mass
Mass bearing | 0.067 kg |
Tolerances and clearances
Bearing data
Bearing interfaces