51316
Single direction thrust ball bearingSingle direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
- Separable design facilitates mounting/dismounting and maintenance inspections
- Interchangeable components
- Ground bore of shaft washers enable interference fit
Description
Dimensions
| d | 80 mm | Bore diameter |
|---|---|---|
| D | 140 mm | Outside diameter |
| H | 44 mm | Height |
| d1 | ≈ 140 mm | Outside diameter shaft washer |
| D1 | ≈ 82 mm | Inner diameter housing washer |
| r1,2 | min. 1.5 mm | Chamfer dimension washer |
Abutment dimensions
| da | min. 116 mm | Abutment diameter shaft |
|---|---|---|
| Da | max. 104 mm | Abutment diameter housing |
| ra | max. 1.5 mm | Fillet radius |
Calculation data
| Basic dynamic load rating | C | 159 kN |
|---|---|---|
| Basic static load rating | C0 | 390 kN |
| Fatigue load limit | Pu | 13.7 kN |
| Reference speed | 1 700 r/min | |
| Limiting speed | 2 400 r/min | |
| Minimum load factor | A | 0.79 |
Mass
| Mass bearing (including seat washer where applicable) | 2.7 kg |
Tolerances and clearances
Bearing data
Bearing interfaces
