29317 E
Spherical roller thrust bearing with stamped steel cageSpherical roller thrust bearings accommodate very heavy axial and considerable radial loads. They have the highest load rating of all thrust bearings, enabling compact, high power density bearing arrangements. By combining two or more spherical roller thrust bearings, it is possible to create a bearing arrangement that is either self-aligning, allowing misalignment of the shaft, or very stiff.
- High load carrying capacity
- Can accommodate combined loads
- Allow misalignment or create very stiff bearing arrangements
- Long service life and low friction
- Separable design
Description
Dimensions
| d | 85 mm | Bore diameter |
|---|---|---|
| D | 150 mm | Outside diameter |
| H | 39 mm | Height |
| d1 | ≈ 134 mm | Outside diameter of shaft washer end side face |
| D1 | ≈ 110 mm | Shoulder diameter outer ring |
| B | 24.5 mm | Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage) |
| B1 | 33.8 mm | Height shaft washer + cage |
| C | 20 mm | Height housing washer |
| s | 50 mm | Distance from shaft washer end side face to pressure point |
| r1,2 | min. 1.5 mm | Chamfer dimension shaft washer |
Abutment dimensions
| da | min. 115 mm | Diameter of shaft abutment |
|---|---|---|
| db1 | max. 90 mm | Abutment diameter of spacer ring |
| db2 | max. 90 mm | Outside diameter of spacer ring |
| Da | max. 129 mm | Diameter of housing abutment |
| ra | max. 1.5 mm | Fillet radius |
Calculation data
| Basic dynamic load rating | C | 380 kN |
|---|---|---|
| Basic static load rating | C0 | 1 060 kN |
| Fatigue load limit | Pu | 129 kN |
| Reference speed | 2 400 r/min | |
| Limiting speed | 4 000 r/min | |
| Minimum axial load factor | A | 0.11 |
Mass
| Mass bearing | 2.75 kg |
Tolerances and clearances
Bearing data
Bearing interfaces
