22324/C3W33VA9B1
Spherical roller bearing for continuous casters, with relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. This variant is optimized for use in continuous casters in the metals industry. The design includes features to facilitate relubrication. The bearings are developed for very slow rotation speed.
- Accommodate misalignment
- High load carrying capacity
- Low friction and long service life
- Increased wear resistance
- Suitable only for very low speed
Description
| Bore type | Cylindrical |
Dimensions
| d | 120 mm | Bore diameter |
|---|---|---|
| D | 260 mm | Outside diameter |
| B | 86 mm | Width |
| d2 | ≈ 152 mm | Shoulder diameter of inner ring |
| D1 | ≈ 216 mm | Shoulder/recess diameter of outer ring |
| b | 13.9 mm | Width of lubrication groove |
| K | 7.5 mm | Diameter of lubrication hole |
| r1,2 | min. 3 mm | Chamfer dimension |
Abutment dimensions
| da | min. 134 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 246 mm | Diameter of housing abutment |
| ra | max. 2.5 mm | Radius of fillet |
Calculation data
| Basic static load rating | C0 | 1 120 kN |
|---|---|---|
| Limiting speed | 20 r/min | |
| Calculation factor | Y0 | 1.8 |
Mass
| Mass | 22 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing interfaces
