22244-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. Under normal operating conditions, sealed bearings are almost maintenance-free, keeping service costs and grease consumption low. The design includes features to facilitate relubrication.
- Accommodate misalignment
- High load carrying capacity
- Sealed for increased reliability, with relubrication features
- Low friction and long service life
- Increased wear resistance
Description
| SKF performance class | SKF Explorer |
| Bore type | Tapered 1:12 |
Dimensions
| d | 220 mm | Bore diameter |
|---|---|---|
| D | 400 mm | Outside diameter |
| B | 108 mm | Width |
| d2 | ≈ 257 mm | Shoulder diameter of inner ring |
| D1 | ≈ 359 mm | Shoulder/recess diameter of outer ring |
| b | 16.7 mm | Width of lubrication groove |
| K | 9 mm | Diameter of lubrication hole |
| r1,2 | min. 4 mm | Chamfer dimension |
Abutment dimensions
| da | max. 257 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 383 mm | Diameter of housing abutment |
| ra | max. 3 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 1 839 kN |
|---|---|---|
| Basic static load rating | C0 | 2 360 kN |
| Fatigue load limit | Pu | 200 kN |
| Limiting speed | 380 r/min | |
| Limiting value | e | 0.25 |
| Calculation factor | Y1 | 2.7 |
| Calculation factor | Y2 | 4 |
| Calculation factor | Y0 | 2.5 |
Mass
| Mass | 56.7 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | P5 |
Tolerances and clearances
Bearing interfaces
