PSM 162016 A51
Sintered bronze straight bushingSKF sintered bronze straight (cylindrical) bushings are suitable for rotating, oscillating and linear movements, and can accommodate radial loads. SKF sintered bronze bushings are self-lubricating and maintenance-free. They consist of a porous bronze matrix that is impregnated with mineral oil. The oil impregnation enables very high sliding velocities and makes these bushings suitable for rotating applications.
- Maintenance-free operation
- Low coefficient of friction
- Very high sliding velocity
Description
| Material | Sintered bronze |
| Operating temperature | min. -10 °C |
| Operating temperature | max. 90 °C |
Dimensions
| d | 16 mm | Bore diameter |
|---|---|---|
| D | 20 mm | Outside diameter |
| B | 16 mm | Width |
Recommended fits
| Tolerance shaft | h8 |
| Tolerance housing | H7 |
Calculation data
| Specific dynamic load factor | K | 10 N/mm² |
|---|---|---|
| Specific static load factor | K0 | 20 N/mm² |
| Permissible sliding velocity | v | min. 0.25 m/s |
| Permissible sliding velocity | v | max. 5 m/s |
| Coefficient of friction | µ | min. 0.05 |
| Coefficient of friction | µ | max. 0.1 |
Mass
| Mass bushing | 0.012 kg |
Tolerances and clearances
Bushing data
Design of bushing arrangements
