GE 12 E
Radial spherical plain bearing, requiring maintenance, metric sizesRadial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/steel sliding contact surface combination. The bearings require maintenance and can be relubricated only from the side.
- Designed for radial and combined radial and axial loads
- Suitable for heavy static, alternating or impact loads
Description
| Maintenance | Relubrication required |
| Sliding contact surface combination | Steel/steel, standard |
| Material, inner ring | Bearing steel |
| Material, outer ring | Bearing steel |
| Sealing | Without |
Dimensions
| d | 12 mm | Bore diameter |
|---|---|---|
| D | 22 mm | Outside diameter |
| B | 10 mm | Width |
| C | 7 mm | Width outer ring |
| α | 10 ° | Angle of tilt |
| dk | 18 mm | Raceway diameter inner ring |
| r1 | min. 0.3 mm | Chamfer dimension bore |
| r2 | min. 0.3 mm | Chamfer dimension outer ring |
Abutment dimensions
| da | min. 13.8 mm | Abutment diameter shaft |
|---|---|---|
| da | max. 15 mm | Abutment diameter shaft |
| Da | min. 17.1 mm | Abutment diameter housing |
| Da | max. 20.4 mm | Abutment diameter housing |
| ra | max. 0.3 mm | Fillet radius shaft |
| rb | max. 0.3 mm | Fillet radius housing |
Calculation data
| Basic dynamic load rating | C | 10.8 kN |
|---|---|---|
| Basic static load rating | C0 | 54 kN |
| Specific dynamic load factor | K | 100 N/mm² |
| Specific static load factor | K0 | 500 N/mm² |
| Material constant | KM | 330 |
Mass
| Mass plain bearing | 0.016 kg |
