GE 12 C
Radial spherical plain bearing, maintenance-free, metric sizesThese spherical plain bearings have a steel/PTFE sintered bronze contact surface combination and are maintenance-free. The sliding surfaces have to be externally protected from contaminants. These bearings are also available with a wider inner ring and a larger outside diameter (suffix GEH), which enable higher load ratings and larger tilt angles.
- Designed for radial and combined radial and axial loads
- Long service life and maintenance-free
- Suitable for heavy, constant direction loads
- Low coefficient of friction
- High operating temperatures
- High sliding velocities and small operating clearances
Description
| Maintenance | Maintenance-free |
| Sliding contact surface combination | Steel/PTFE sintered bronze |
| Material, inner ring | Bearing steel |
| Material, outer ring | Steel |
| Sealing | Without |
Dimensions
| d | 12 mm | Bore diameter |
|---|---|---|
| D | 22 mm | Outside diameter |
| B | 10 mm | Width |
| C | 7 mm | Width outer ring |
| α | 10 ° | Angle of tilt |
| dk | 18 mm | Raceway diameter inner ring |
| r1 | min. 0.3 mm | Chamfer dimension bore |
| r2 | min. 0.3 mm | Chamfer dimension outer ring |
Abutment dimensions
| da | min. 13.5 mm | Abutment diameter shaft |
|---|---|---|
| da | max. 15 mm | Abutment diameter shaft |
| Da | min. 17.1 mm | Abutment diameter housing |
| Da | max. 20.6 mm | Abutment diameter housing |
| ra | max. 0.3 mm | Fillet radius shaft |
| rb | max. 0.3 mm | Fillet radius housing |
Calculation data
| Basic dynamic load rating | C | 11.4 kN |
|---|---|---|
| Basic static load rating | C0 | 28.5 kN |
| Specific dynamic load factor | K | 100 N/mm² |
| Specific static load factor | K0 | 250 N/mm² |
| Material constant | KM | 1 400 |
Mass
| Mass plain bearing | 0.017 kg |
