KDN.S07403CS0
Ultra-Slim thin section radial contact ball bearingRadial contact ball bearings with seals or shields are designed to accommodate radial loads and some axial loads in either direction. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are not recommended for applications having continuous rotation.
- Accommodate radial and some axial loads in both directions
- Extremely thin cross section
- Lightweight
- Chemical and corrosion resistance
- Low friction
- High stiffness
- High running accuracy
Description
Dimensions
| d | 74 mm | Bore diameter |
|---|---|---|
| D | 80 mm | Outside diameter |
| H | 3 mm | Radial cross section |
| B | 2.5 mm | Width |
| d1 | ≈ 76.2 mm | Shoulder diameter inner ring |
| D1 | ≈ 77.8 mm | Shoulder diameter outer ring/ inner diameter housing washer |
1.588 mm | Ball diameter | |
0.25 mm | Maximum radius of shaft or housing fillet |
Calculation data
| Dynamic load rating, Kaydon, radial direction | CK | 689 N |
|---|---|---|
| Basic static load rating, radial direction | C0 | 875 N |
Mass
| Mass bearing | ≈ 0.011 kg |
Tolerances and clearances
General bearing specifications
