KDN.S06003AS0
Ultra-Slim thin section angular contact ball bearingThese angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are not recommended for applications having continuous rotation.
- Accommodate radial loads and axial loads in one direction
- Extremely thin cross section
- Lightweight
- Chemical and corrosion resistance
- Low friction
- High stiffness
- High running accuracy
Description
Dimensions
d | 60 mm | Bore diameter |
---|---|---|
D | 66 mm | Outside diameter |
H | 3 mm | Radial cross section |
B | 2.5 mm | Width |
d1 | ≈ 62.2 mm | Shoulder diameter inner ring |
D1 | ≈ 63.8 mm | Shoulder diameter outer ring/ inner diameter housing washer |
1.588 mm | Ball diameter | |
0.25 mm | Maximum radius of shaft or housing fillet |
Calculation data
Dynamic load rating, Kaydon, radial direction | CK | 552 N |
---|---|---|
Basic static load rating, radial direction | C0 | 649 N |
Maximum loading limit, axial direction | Fa | 1 112 N |
Mass
Mass bearing | ≈ 0.009 kg |
Tolerances and clearances
General bearing specifications