KDN.JHA17XL0
Reali-Slim thin section four-point contact ball bearing with seals or shieldsFour-point contact ball bearings with seals or shields can accommodate radial, axial and moment loads simultaneously. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. The bearings are available with metric and inch boundary dimensions.
- Accommodate radial, axial and moment loads simultaneously
- Require considerably less axial space than two angular contact ball bearings
- Integral sealing prolongs bearing service life
- Thin cross section
- Lightweight
- Low friction
- High stiffness
- High running accuracy
Description
Dimensions
| d | 44.45 mm | Bore diameter |
|---|---|---|
| D | 53.975 mm | Outside diameter |
| H | 4.763 mm | Radial cross section |
| B | 6.35 mm | Width |
| d2 | ≈ 47.193 mm | Recess diameter inner ring |
| D2 | ≈ 51.41 mm | Recess diameter outer ring |
2.381 mm | Ball diameter | |
0.381 mm | Maximum radius of shaft or housing fillet |
Calculation data
| Dynamic load rating, Kaydon, radial direction | CK | 1.42 kN |
|---|---|---|
| Basic static load rating, radial direction | C0 | 2.05 kN |
| Basic static load rating, axial direction | C0a | 5.07 kN |
| Basic dynamic load rating, moment | CM | 0.0262 kN·m |
| Basic static load rating, moment | C0M | 0.0497 kN·m |
| Starting torque max. no load | 0.0423 N·m | |
| Limiting speed | 1 710 r/min |
Mass
| Mass bearing | ≈ 0.027 kg |
