89456 M
Double row cylindrical roller thrust bearing, single directionDouble row cylindrical roller thrust bearings are designed to accommodate heavy axial loads and peak loads in one direction, but not radial loads. They provide a high degree of stiffness and require little axial space. They are mainly used in applications where thrust ball bearings do not have sufficient load carrying capacity. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
- High axial load carrying capacity
- High stiffness
- Long service life
- Require little axial space
- Separable design
Description
Dimensions
| d | 280 mm | Bore diameter |
|---|---|---|
| D | 520 mm | Outside diameter |
| H | 145 mm | Height |
| d1 | 517 mm | Outside diameter shaft washer |
| D1 | 285 mm | Bore diameter housing washer |
| B | 48.5 mm | Height shaft washer |
| r1,2 | min. 6 mm | Chamfer dimension housing washer |
Abutment dimensions
| da | min. 512 mm | Abutment diameter shaft |
|---|---|---|
| Da | max. 311 mm | Abutment diameter housing |
| ra | max. 5 mm | Fillet radius |
Calculation data
| Basic dynamic load rating | C | 3 550 kN |
|---|---|---|
| Basic static load rating | C0 | 15 300 kN |
| Fatigue load limit | Pu | 1 120 kN |
| Reference speed | 280 r/min | |
| Limiting speed | 560 r/min | |
| Minimum axial load factor | A | 19 |
Mass
| Mass bearing | 142 kg |
Included products
| Shaft washer | IW-89456 |
| Housing washer | OW-89456 |
Tolerances and clearances
Bearing data, Design considerations
Bearing interfaces
