81230 M
Single row cylindrical roller thrust bearing, single directionSingle row cylindrical roller thrust bearings are designed to accommodate heavy axial loads and peak loads in one direction, but not radial loads. They provide a high degree of stiffness and require little axial space. They are mainly used in applications where thrust ball bearings do not have sufficient load carrying capacity. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
- High axial load carrying capacity
- High stiffness
- Long service life
- Require little axial space
- Separable design
Description
Dimensions
| d | 150 mm | Bore diameter |
|---|---|---|
| D | 215 mm | Outside diameter |
| H | 50 mm | Height |
| d1 | 212 mm | Outside diameter shaft washer |
| D1 | 153 mm | Bore diameter housing washer |
| B | 14.5 mm | Height shaft washer |
| r1,2 | min. 1.5 mm | Chamfer dimension housing washer |
Abutment dimensions
| da | min. 211 mm | Abutment diameter shaft |
|---|---|---|
| Da | max. 158 mm | Abutment diameter housing |
| ra | max. 1.5 mm | Fillet radius |
Calculation data
| Basic dynamic load rating | C | 465 kN |
|---|---|---|
| Basic static load rating | C0 | 1 900 kN |
| Fatigue load limit | Pu | 170 kN |
| Reference speed | 630 r/min | |
| Limiting speed | 1 300 r/min | |
| Minimum axial load factor | A | 0.289 |
Mass
| Mass bearing | 7.2 kg |
Tolerances and clearances
Bearing data, Design considerations
Bearing interfaces
