K 81118 TN
Cylindrical roller and cage thrust assemblyCylindrical roller and cage thrust assemblies are designed to accommodate heavy axial loads and peak loads in one direction, but not radial loads. Thrust assemblies can be used in applications where the adjacent components serve as raceways and enable bearing arrangements with a low axial section heights. Where the adjacent components cannot serve as raceways, they can be combined with one or two bearing washers to create complete bearings.
- High axial load carrying capacity
- High stiffness
- Long service life
- Require little axial space
- Can be combined with bearing washers
Description
Dimensions
| d | 90 mm | Bore diameter |
|---|---|---|
| D | 120 mm | Outside diameter |
| Dw | 9 mm | Diameter roller |
| Ea | 93 mm | Raceway diameter (min.) roller and cage thrust assembly |
| Eb | 117 mm | Raceway diameter (max.) roller and cage thrust assembly |
Calculation data
| Basic dynamic load rating | C | 110 kN |
|---|---|---|
| Basic static load rating | C0 | 450 kN |
| Fatigue load limit | Pu | 45.5 kN |
| Reference speed | 1 300 r/min | |
| Limiting speed | 2 600 r/min | |
| Minimum axial load factor | A | 0.0162 |
Mass
| Mass roller and cage thrust assembly | 0.15 kg |
Tolerances and clearances
Bearing data, Design considerations
Bearing interfaces
