KR 19 PP
Cam follower (stud-type track roller) with integral sealing and relubrication featureCam followers (stud-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. They are based on a needle roller bearing with a threaded solid stud instead of an inner ring. They have a thick-walled outer ring with a crowned running surface and are supplied sealed and ready-to-mount. The bearings can be relubricated via the stud.
- High radial load carrying capacity
- Accommodate axial loads due to skew or tilting
- Long service life
- Easy to mount
- Sealed for increased reliability, with relubrication feature
Description
Dimensions
| D | 19 mm | Outside diameter |
|---|---|---|
| d | 8 mm | Attachment diameter |
| B | 32.2 mm | Total length |
| C | 11 mm | Width outer ring |
| B1 | 20 mm | Length shank on stud |
| C1 | 0.6 mm | Distance face outer ring to face side washer |
| d1 | 13.9 mm | Outside diameter flange ring |
| G | M8x1.25 | Thread stud |
| G1 | 10 mm | Length thread |
| M | 3 mm | Seat diameter for lubrication accessories |
| SW | 4 mm | Width across flats |
Calculation data
| Basic dynamic load rating | C | 3.3 kN |
|---|---|---|
| Basic static load rating | C0 | 3.8 kN |
| Fatigue load limit | Pu | 0.415 kN |
| Maximum dynamic radial loads | Fr | max. 3.75 kN |
| Maximum static radial loads | F0r | max. 5.4 kN |
| Limiting speed | 5 600 r/min |
Mass
| Mass cam follower | 0.029 kg |
Mounting information
| Recommended tightening torque | 8 N·m |
Included products
| Grease fitting | NIP C3.2×5.2 |
| Hexagonal nut | M 8×1.25 |
Tolerances and clearances
Bearing data
Bearing interfaces
