292/600 EM
Spherical roller thrust bearing with machined metal cageSpherical roller thrust bearings accommodate very heavy axial and considerable radial loads. They have the highest load rating of all thrust bearings, enabling compact, high power density bearing arrangements. By combining two or more spherical roller thrust bearings, it is possible to create a bearing arrangement that is either self-aligning, allowing misalignment of the shaft, or very stiff.
- High load carrying capacity
- Can accommodate combined loads
- Allow misalignment or create very stiff bearing arrangements
- Long service life and low friction
- Separable design
Description
Dimensions
| d | 600 mm | Bore diameter |
|---|---|---|
| D | 800 mm | Outside diameter |
| H | 122 mm | Height |
| d1 | ≈ 760 mm | Outside diameter of shaft washer end side face |
| D1 | ≈ 688 mm | Shoulder diameter outer ring |
| B | 39 mm | Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage) |
| B1 | 117 mm | Height shaft washer + cage |
| C | 60 mm | Height housing washer |
| s | 321 mm | Distance from shaft washer end side face to pressure point |
| r1,2 | min. 5 mm | Chamfer dimension shaft washer |
Abutment dimensions
| da | min. 700 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 735 mm | Diameter of housing abutment |
| ra | max. 4 mm | Fillet radius |
Calculation data
| Basic dynamic load rating | C | 3 740 kN |
|---|---|---|
| Basic static load rating | C0 | 18 600 kN |
| Fatigue load limit | Pu | 1 460 kN |
| Reference speed | 450 r/min | |
| Limiting speed | 700 r/min | |
| Minimum axial load factor | A | 33 |
Mass
| Mass bearing | 170 kg |
Tolerances and clearances
Bearing data
Bearing interfaces
