51102
Single direction thrust ball bearingSingle direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
- Separable design facilitates mounting/dismounting and maintenance inspections
- Interchangeable components
- Ground bore of shaft washers enable interference fit
Description
Dimensions
| d | 15 mm | Bore diameter |
|---|---|---|
| D | 28 mm | Outside diameter |
| H | 9 mm | Height |
| d1 | ≈ 28 mm | Outside diameter shaft washer |
| D1 | ≈ 16 mm | Inner diameter housing washer |
| r1,2 | min. 0.3 mm | Chamfer dimension washer |
Abutment dimensions
| da | min. 23 mm | Abutment diameter shaft |
|---|---|---|
| Da | max. 20 mm | Abutment diameter housing |
| ra | max. 0.3 mm | Fillet radius |
Calculation data
| Basic dynamic load rating | C | 10.6 kN |
|---|---|---|
| Basic static load rating | C0 | 18.3 kN |
| Fatigue load limit | Pu | 0.67 kN |
| Reference speed | 8 500 r/min | |
| Limiting speed | 12 000 r/min | |
| Minimum load factor | A | 0.0017 |
Mass
| Mass bearing (including seat washer where applicable) | 0.023 kg |
Tolerances and clearances
Bearing data
Bearing interfaces
