360141
Deep groove ball bearingSingle row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
- Simple, versatile and robust design
- Low friction
- High-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
Description
Dimensions
| d | 710 mm | Bore diameter |
|---|---|---|
| D | 1 080 mm | Outside diameter |
| B | 160 mm | Width |
| d1 | ≈ 835.02 mm | Shoulder diameter |
| D1 | ≈ 952.25 mm | Shoulder diameter |
| h | 45 mm | Depth of locating slot |
| b | 31 mm | Width of locating slot |
| r0 | 3 mm | Corner radius of locating slot |
| r1,2 | min. 7.5 mm | Chamfer dimension |
Abutment dimensions
| da | min. 738 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 1 052 mm | Diameter of housing abutment |
| ra | max. 6 mm | Radius of shaft or housing fillet |
Calculation data
| Basic dynamic load rating | C | 1 040 kN |
|---|---|---|
| Basic static load rating | C0 | 2 400 kN |
| Fatigue load limit | Pu | 34 kN |
| Reference speed | 1 000 r/min | |
| Limiting speed | 630 r/min | |
| Minimum load factor | kr | 0.03 |
| Calculation factor | f0 | 16 |
Mass
| Mass bearing | 567 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing data
Bearing interfaces
