61888 MA
Deep groove ball bearingSingle row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
- Simple, versatile and robust design
- Low friction
- High-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
Description
Dimensions
| d | 440 mm | Bore diameter |
|---|---|---|
| D | 540 mm | Outside diameter |
| B | 46 mm | Width |
| d1 | ≈ 472 mm | Shoulder diameter |
| D1 | ≈ 509.13 mm | Shoulder diameter |
| r1,2 | min. 2.1 mm | Chamfer dimension |
Abutment dimensions
| da | min. 452 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 528 mm | Diameter of housing abutment |
| ra | max. 2 mm | Radius of shaft or housing fillet |
Calculation data
| Basic dynamic load rating | C | 255 kN |
|---|---|---|
| Basic static load rating | C0 | 440 kN |
| Fatigue load limit | Pu | 8.5 kN |
| Reference speed | 2 200 r/min | |
| Limiting speed | 1 800 r/min | |
| Minimum load factor | kr | 0.015 |
| Calculation factor | f0 | 17.4 |
Mass
| Mass bearing | 22.5 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing data
Bearing interfaces
