232/670-2CS5K/VT143
Spherical roller bearingSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. They can be used in a modular system, including housings, sleeves and nuts.
- Accommodate misalignment
- High load carrying capacity
- Low friction and long service life
- Extensive range available sealed for increased reliability
- Increased wear resistance
Description
| SKF performance class | SKF Explorer |
| Bore type | Tapered 1:12 |
Dimensions
| d | 670 mm | Bore diameter |
|---|---|---|
| D | 1 220 mm | Outside diameter |
| B | 438 mm | Width |
| d2 | ≈ 788 mm | Shoulder diameter of inner ring |
| D1 | ≈ 1 060 mm | Shoulder/recess diameter of outer ring |
| b | 22.3 mm | Width of lubrication groove |
| K | 12 mm | Diameter of lubrication hole |
| r1,2 | min. 12 mm | Chamfer dimension |
Abutment dimensions
| Da | max. 1 172 mm | Diameter of housing abutment |
|---|---|---|
| ra | max. 10 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 18 683 kN |
|---|---|---|
| Basic static load rating | C0 | 30 500 kN |
| Fatigue load limit | Pu | 1 700 kN |
| Limiting speed | 120 r/min | |
| Limiting value | e | 0.35 |
| Calculation factor | Y1 | 1.9 |
| Calculation factor | Y2 | 2.9 |
| Calculation factor | Y0 | 1.8 |
Mass
| Mass | 2 185 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing interfaces
