YRTC200-XL

Axial/radial roller bearing

Axial/radial bearings, double direction, for screw mounting

Two retaining screws

Display units

Metric

Imperial

Main Dimensions & Performance Data

d	200 mm	Bore diameter
	0 mm	Bore diameter upper tolerance
	-0.015 mm	Bore diameter lower tolerance
D	300 mm	Outside diameter
	0 mm	Outside diameter upper tolerance
	-0.018 mm	Outside diameter lower tolerance
H	45 mm	Height
C_r	123,000 N	Basic dynamic load rating, radial
C_0r	275,000 N	Basic static load rating, radial
C_a	147,000 N	Basic dynamic load rating, axial
C_0a	850,000 N	Basic static load rating, axial
n_G	450 1/min	Limiting speed
M_R	6 Nm	Bearing friction torque at 5 1/min
≈m	9.149 kg	Weight

Mounting dimensions

J	215 mm	Pitch circle diameter fixing holes in inner ring
J₁	285 mm	Pitch circle diameter fixing holes in outer ring
d₁	7 mm	Fixing holes diameter inner ring
d₂	11 mm	Counterbore diameter of fixing holes
a	6.2 mm	Counterbore depth of fixing holes
	46	Quantity of fixing holes inner ring
d₃	7 mm	Fixing holes diameter outer ring
	45	Quantity of fixing holes outer ring
n	48	Pitch quantity
t	7.5 °	Pitch separation angle
G	M8	Threaded extraction hole
	3	Quantity of threaded extraction hole
M_A	14 Nm	Screw tightening torque
	2	Quantity of retaining screws
t₁	4 µm	Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction.

Dimensions

H₁	30 mm	Height contact face outer ring
	0.03 mm	Height contact face outerring H1 upper tolerance
	-0.03 mm	Height contact face outerring H1 lower tolerance
H₂	15 mm	Height contact face outer ring
	0.025 mm	Height contact face outerring H2 upper tolerance
	-0.025 mm	Height contact face outerring H2 lower tolerance
D_{1 max}	274.4 mm	Maximum bord diameter inner ring
C	15 mm	Width of outer ring

Temperature range

T_min	-30 °C	Operating temperature min.
T_max	120 °C	Operating temperature max.

Additional information

c_aL	4,900 N/µm	Axial rigidity of bearing position
c_rL	4,100 N/µm	Radial rigidity of bearing position
c_kL	40,000 Nm/mrad	Tilting rigidity of bearing position
c_aL	15,500 N/µm	Axial rigidity of rolling element set
c_rL	6,200 N/µm	Radial rigidity of rolling element set
c_kL	128,000 Nm/mrad	Tilting rigidity of rolling element set

Downloads:

Characteristics

Title