YRTC100-XL

Axial/radial roller bearing

Axial/radial bearings, double direction, for screw mounting

Two retaining screws

Display units

Metric

Imperial

Main Dimensions & Performance Data

d	100 mm	Bore diameter
	0 mm	Bore diameter upper tolerance
	-0.01 mm	Bore diameter lower tolerance
D	185 mm	Outside diameter
	0 mm	Outside diameter upper tolerance
	-0.02 mm	Outside diameter lower tolerance
H	38 mm	Height
C_r	49,500 N	Basic dynamic load rating, radial
C_0r	88,000 N	Basic static load rating, radial
C_a	105,000 N	Basic dynamic load rating, axial
C_0a	455,000 N	Basic static load rating, axial
n_G	1,200 1/min	Limiting speed
M_R	2.5 Nm	Bearing friction torque at 5 1/min
≈m	3.62 kg	Weight

Mounting dimensions

J	112 mm	Pitch circle diameter fixing holes in inner ring
J₁	170 mm	Pitch circle diameter fixing holes in outer ring
d₁	5.6 mm	Fixing holes diameter inner ring
d₂	10 mm	Counterbore diameter of fixing holes
a	5.4 mm	Counterbore depth of fixing holes
	16	Quantity of fixing holes inner ring
d₃	5.6 mm	Fixing holes diameter outer ring
	15	Quantity of fixing holes outer ring
n	18	Pitch quantity
t	20 °	Pitch separation angle
G	M5	Threaded extraction hole
	3	Quantity of threaded extraction hole
M_A	8.5 Nm	Screw tightening torque
	2	Quantity of retaining screws
t₁	3 µm	Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction.

Dimensions

H₁	25 mm	Height contact face outer ring
	0.025 mm	Height contact face outerring H1 upper tolerance
	-0.025 mm	Height contact face outerring H1 lower tolerance
H₂	13 mm	Height contact face outer ring
	0.02 mm	Height contact face outerring H2 upper tolerance
	-0.02 mm	Height contact face outerring H2 lower tolerance
D_{1 max}	161 mm	Maximum bord diameter inner ring
C	12 mm	Width of outer ring

Temperature range

T_min	-30 °C	Operating temperature min.
T_max	120 °C	Operating temperature max.

Additional information

c_aL	2,650 N/µm	Axial rigidity of bearing position
c_rL	2,250 N/µm	Radial rigidity of bearing position
c_kL	7,500 Nm/mrad	Tilting rigidity of bearing position
c_aL	8,700 N/µm	Axial rigidity of rolling element set
c_rL	3,700 N/µm	Radial rigidity of rolling element set
c_kL	23,500 Nm/mrad	Tilting rigidity of rolling element set

Downloads:

Characteristics

Title