KR16
Yoke type track roller
Stud type track rollers KR, with axial guidance, gap seals on both sides
Replaces
KR 16
Yoke type track roller
Stud type track rollers KR, with axial guidance, gap seals on both sides
Metric
Imperial
D | 16 mm | Outside diameter |
d1 | 6 mm | Fit diameter of roller stud / stud |
B | 28 mm | Width of the roller stud |
Cr w | 3,200 N | Basic dynamic load rating, radial |
C0r w | 3,450 N | Basic static load rating, radial |
Cur w | 465 N | Fatigue load limit, radial |
nD G | 14,000 1/min | Speed on permanent grease lubrication |
≈m | 18.35 g | Weight |
B1 | 12.2 mm | Maximum witdh of thrust washer |
B2 | 16 mm | Bolt/stud length effectively |
C | 11 mm | Width, outer ring |
C1 | 0.6 mm | Protrusion outer ring to thrust washer |
rmin | 0.15 mm | Minimum chamfer dimension |
d2 | 12.5 mm | Stop diameter of thrust washer |
G | M6 | Thread |
IG | 8 mm | Thread length |
R | 500 mm | Radius of outer ring outside profile |
NIPA1 | Drive-fit lubrication nipple | |
1.5 mm | Protrusion lubrication nipple | |
MA | 3 Nm | Tightening torque nut |
Sealing | Gap seal on both sides | |
Outer Ring profile | R500 | |
Grease nipples | Drive-fit lubrication nipple unmounted 1x | |
Relubrication feature | Via head | |
Assembling aid head | Mounting slot |
Characteristics