Description
Metric
Imperial
Main Dimensions & Performance Data
| d | 50 mm | Bore diameter |
| 0 mm | Bore diameter upper tolerance | |
| -0.006 mm | Bore diameter lower tolerance | |
| D | 100 mm | Outside diameter |
| 0 mm | Outside diameter upper tolerance | |
| -0.008 mm | Outside diameter lower tolerance | |
| B | 20 mm | Width |
| 0 mm | Width upper tolerance | |
| -0.12 mm | Width lower tolerance | |
| Ca | 68,000 N | Basic dynamic load rating, axial |
| C0a | 172,000 N | Basic static load rating, axial |
| Cua | 10,400 N | Fatigue load limit, axial |
| nG Grease | 4,000 1/min | Limiting speed for grease lubrication |
| nϑ | 2,700 1/min | Thermally safe operating speed |
| ≈m | 0.75 kg | Weight |
Mounting dimensions
| Da | 85.5 mm | Diameter of housing |
| Da | H12 | Diameter of housing clearance |
| da | 64.5 mm | Diameter shaft |
| da | h12 | Diameter shaft clearance |
Dimensions
| rmin | 1.5 mm | Minimum chamfer dimension |
| r1 min | 1.5 mm | Minimum chamfer dimension |
| a | 75 mm | Distance between the apexes of the pressure cones |
| α | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| MR | 0.33 Nm | Bearing frictional torque |
| caL | 1,473 N/µm | Rigidity axial |
| 2.5 µm | Axial runout | |
| ZM50 | Recommended INA precision locknut for radial locking | |
| AM50 | Recommended INA precision locknut for axial locking | |
| MA | 120 Nm | Tightening torque for the recommended INA precision locknut |
| 23,770 N | Required locknut force axial |
Your current product variant
| Cage | Standard | Polyamide cage |
| Sealing | 2Z | Minimal gap seal on both sides |
Characteristics
