234406-M-SP
Axial angular contact ball bearing
Axial angular contact ball bearings 2344, double direction, separable, restricted tolerances
Replaces
234406M.SP
Axial angular contact ball bearing
Axial angular contact ball bearings 2344, double direction, separable, restricted tolerances
Metric
Imperial
d | 30 mm | Bore diameter |
D | 55 mm | Outside diameter |
B | 32 mm | Width |
C | 16 mm | Width, outer ring |
Ca | 15,700 N | Basic dynamic load rating, axial |
C0a | 38,500 N | Basic static load rating, axial |
Cua | 3,600 N | Fatigue load limit, axial |
nG Grease | 11,000 1/min | Limiting speed for grease lubrication |
nG Oil | 16,000 1/min | Limiting speed for oil lubrication |
≈m | 291.03 g | Weight |
da | 40.5 mm | Diameter shaft shoulder |
da | h12 | Diameter shaft shoulder clearance |
Da | 50.5 mm | Shoulder diameter outer ring |
Da | H12 | Shoulder diameter outer ring clearance |
ra max | 1 mm | Maximum recess radius |
ra1 max | 0.15 mm | Maximum recess radius |
α | 60 ° | Contact angle |
a | 91.5 mm | Distance between the apexes of the pressure cones |
d1 | 47 mm | Rip diameter shaft washer |
B1 | 8 mm | Height wave disc |
rmin | 1 mm | Minimum chamfer dimension |
r1 min | 0.15 mm | Minimum chamfer dimension |
ds | 3.2 mm | Diameter lubrication hole |
ns | 4.8 mm | Width of lubricating groove |
Tmin | -30 °C | Operating temperature min. |
Tmax | 150 °C | Operating temperature max. |
ca | 276 N/µm | Axial rigidity |
KaE | 308 N | Lift-off force |
Fv | 108 N | Preload force |
Cage | M | Brass Cage |
Tolerance class | SP | tolerance class SP |
Characteristics